{"id":2422,"date":"2023-01-20T15:38:34","date_gmt":"2023-01-20T13:38:34","guid":{"rendered":"https:\/\/fire-techinfo.com\/?p=2422"},"modified":"2023-07-10T19:03:58","modified_gmt":"2023-07-10T16:03:58","slug":"low-pressure-water-mist-the-modern-approach-in-firefighting-industry-part-1","status":"publish","type":"post","link":"https:\/\/fire-techinfo.com\/en\/low-pressure-water-mist-the-modern-approach-in-firefighting-industry-part-1\/","title":{"rendered":"Low pressure water mist – the modern approach in firefighting industry, Part 1"},"content":{"rendered":"

 <\/p>\n

For the last thirty years, water mist fire protection has evolved from a theory to an increasingly widely accepted alternative to traditional water, foam or gas fire protection systems. Water mist offers better protection efficiency, significantly less water consumption and lower investment costs.<\/strong><\/p>\n

Water mist systems are a special category of fire protection systems that, depending on the class of fire hazard, can be designed to control, suppress or extinguish a fire. Their effectiveness is proven by full-scale tests for each class of fire hazard.<\/strong><\/p><\/blockquote>\n

 <\/p>\n

\"Fire
Fire test. Source: \u00a9 VID FIREKILL<\/em><\/figcaption><\/figure>\n

There are two main types of water mist systems – those that operate at low pressure (up to 16 bar) and others that operate at high pressure (from 50 to 140 bar). Both types of systems use a very fine water spray composed of micro-sized water droplets. Until recently, it was thought that droplet size and extinguishing efficiency were closely related, and that the smaller the droplets are, the more efficient the system is. And the smaller droplet size was automatically associated with the operation of high-pressure systems, giving them priority over the low-pressure water mist systems.<\/p>\n

The modern approach to the development of water mist technology reveals many different factors on which the effectiveness of water mist systems depends. These factors may be, on the one hand, the water mist spray characteristics such as distribution of droplet size; flux density, expressed as the amount of water released per unit volume \/ area per minute; spray dynamics, expressed in the speed and trajectory of the droplets. On the other hand, it is necessary to take into account the specific fire scenario (geometry of the room, type and size of flammable materials, ventilation conditions, ambient temperature, etc.). Factors such as enclosure effect, dynamic mixing created by the discharge by a group of nozzles, also affect the performance of water mist systems.<\/p>\n

\"Low-pressure
Low-pressure water mist. Source: \u00a9 VID FIREKILL<\/em><\/figcaption><\/figure>\n

Due to this complexity of the fire extinguishing process, the relationship between the fire scenario and the characteristic of the system is not unambiguous, but very complex. Neither the droplets size nor the operating pressure determines the effectiveness of the system. Only full-scale fire tests prove whether a system can handle a certain risk. Moreover, empirical studies show that water mist with a combined distribution of different sized droplets achieves higher efficiency compared to water mist composed of the same or even very small droplet size. For this reason, water mist systems are always selected on the basis of positive fire test results.<\/p>\n

The modern research with a combination of experimental and computational methods, the compilation of computer models and their validation by fire tests allow much more efficient and effective development of water mist systems. This approach was followed by VID Fire-Kill ApS when developing and creating the FFIREKILL\u2122 system<\/p>\n

\"Low-pressure
Low-pressure water mist nozzles. Source: \u00a9 VID FIREKILL<\/figcaption><\/figure>\n

 <\/p>\n

Why is the FIREKILL\u2122 system so efficient??<\/strong><\/span><\/p>\n

\n
\n
\n
\n
\n
\n
\n

The FIREKILL\u2122 low pressure water mist system is a complete solution for protection against many fire hazards in modern buildings and industrial facilities. The system includes a full range of equipment (nozzles, pumps, valves, etc.), documents and applicability according to CEN EN 14972, system manual for design, installation, operation and maintenance, certificates and approvals according to many standards, including third parties, as well as protocols of full-scale fire tests.<\/p>\n

Compared to gas agents and traditional sprinkler systems, the low pressure water mist technology implemented in the FIREKILL\u0422\u041c system shows a number of advantages, summarized in the following most important characteristics:<\/p>\n